Composite Fence Complete Strong Boards and Aluminium Component

PRODUCT DESCRIPTION

These composite fencing boards, are the hard wearing type, made from the same material / strength as the composite decking. The tongue and groove fit ensures stability, and with the option of a top design detail with a 20cms board ( as image ). No maintenance required and you have the option to make the fence as high as you like. Steel post holder and composite post ensures a solid fence that will last a lifetime. 

The boards also have a plain smooth side as well as a slatted line effect on the other side so you can choose the look you prefer.

These boards are not the lightweight PVC fencing ( which can be damaged/ broken easily)  that is available through other sellers.

The post are designed to be drilled onto a floor level concrete base and not sunk into the ground.

Each post will have 3 groves for the boards, to enable a long run or a corner fitting panel.

Order you sample for quick delivery, so you can see before you purchase.

PRODUCT FEATURES:

No / low maintenance
No visible screws
Weather resistant
Will not rot , warp or split
Very Strong boards, post, edge trims and fitting.  Not PVC .

PRODUCT COMPONENTS:

* Main board – 1750mm wide x 180mm tall x 22mm deep, 10 boards will make a 6ft tall fence.

* Top board -  1750mm wide x 90mm tall x 22mm deep, you can use replace 2 of the main boards and use 3 of these to give the fence a design feature.

* Composite Post and Steel bracket For post  – 1800mm high require 1 per fence and one steel bracket ( and an additional 1 for the whole project)

* Steel bracket For post – Require 1 to secure the post to the ground ( you will get one with each post ordered)

* Post cap –  Top  cap for post , require 1 ( you will receive this with every post)

* Aluminum top/bottom trim – 1750mm long, these bars go at the start and top of the fence to make the whole structure more rigid being aluminum and to leave the fence with a clean edge. Require 2 per fence. 

* Corner clip – These fit into the aluminum trim to secure the fence panel, so that they cannot be removed. Require 4 per fence panel  ( you will receive 4 of these this with every post)


* Spacing bars – Only use these if you are purchasing the fence panel with spacer design, as these spaces created the gap, require 12 per fence. ( you will receive 12 of these with every 3 of the 90mm high boards)


* Screws – These are used on the corner clips, require 8 per full fence panel  (you will receive 4 of these this with every post)

* Fixings – These are used to hold post steel bracket, require 4 per bracket ( you will receive 4 of these this with every post)

below is the items required to make a fence as below

PRODUCT PURCHASE OPTIONS:

Full Board Fence Panel 6ft wide  x 6ft tall – this is a full panel fence and will include the below;
10 x main boards at 180mm high
1 x Composite post
1 x Steel bracket For post
1 x Steel post cap
2 x Aluminum top/bottom trims
4 x Corner clip –
4 x Screws –
4 x Fittings

( Please note, you will have to purchase 1 extra post , so that you can finish off the last fence, as you only get one post with each 6ft fence order)

Fence Panel With Spacer 6ft wide  x 6ft tall – this is a  panel fence with spacer design at top and will include the below ;
8 x main boards at 180mm high
3 x main boards at 90mm high
1 x Composite post
1 x Steel bracket For post
1 x Steel post cap
2 x Aluminum top/bottom trims
4 x Corner clip –
4 x Screws –
4 x Fittings
12 x spacers

(Please note, you will have to purchase 1 extra post , so that you can finish off the last fence, as you only get one post with each 6ft fence order)

Extra Fence Post- you will need this to finish off the last fence panel, you will receive;

1 x Composite post
1 x Steel bracket for post
1 x Steel post cap
4 x Fittings

Due to the weight of the products , there is a minimum spend of £100 for free delivery

Shipping Information:

We aim to dispatch orders on the following working day, (Unless specified in the product title). For goods that are heavy (over 25kgs) or bulky (over 4 cubic ft) dispatch time may be a few more days. Once the goods are dispatched we aim to use a 24-48 hr courier. This shipping applies to order from other postcodes – being GB excluding the following postcodes; BT - IV - KW - PA - PH – PO - HS - ZE - IM - KA - AB - GY - JE - All isles off the GB. For the following postcodes ; BT - IV - KW - PA - PH – PO - HS - ZE - IM - KA - AB - GY - JE - All isles off the GB, please contact us via message with the product that you are interested in and your postcode so we can see if delivery is possible. If there is an issue with the order or delivery details, we will contact you through the email address / phone number provided with the order. For more information please see our Delivery Information page.

Delivery Information:

Once the goods are dispatched, you should receive a notification from us and from the courier with the tracking number. On the day of delivery, our couriers will either email or text you depending on the information you’ve provided us with (a mobile phone number is the best form of contact), Included in the email/text will be a time slot so you’re able to base your day around the delivery. You can log onto the courier website with the tracking number to manage delivery. If you’re having issues with the delivery please contact us so we can help. If you’re having issues with delivery please contact us so we can help.

Returns Information

If you’re looking to return your item then you can use our easy 3 step return process. Here at Dirty Pro Tools, we offer a 30 day return period, so any orders less than 30 days old can be returned to us for a full refund! The item must be in the same condition you received them in, along with the original packaging, all manuals and accessories.

Step 1: Contact us via email or use our contact form. (Remember to include your order number and brief explanation on why you’re returning the item.)
Step 2: Wait for a reply from one of our friendly team members.
Step 3: Return your item and receive a refund.

For full information and guidance on our return process please see our Returns Information page.